After installing the latest updates some users are complaining about encountering an Undoing changes boot loop. The error indicates that the machine failed to install the updates and is trying to revert the changes.
If you are stuck in a similar situation, you are at the right place. In this post, we will talk about how to address the fact that we could not complete the updates/undo the alterations done to your machine.
Reasons for Windows 10, 11 Undoing Changes, Error?
Undoing changes and error messages might occur for a variety of reasons. The most typical reason, however, is an update problem.
- Update service stopped working while updates were downloading.
- Corrupted system files
- Unexpected shut down during the update process.
Ways to Fix the “Undoing Changes” Error in Windows 10?
1. Shut Down Your PC and Turn Off Wi-Fi
Shut down the system and turn off the Wi-Fi connection. Alternatively, you can unplug the router > wait for a minute or so, and then turn back the system to check if “undoing changes” is solved or not.
If you managed to boot your computer normally, run the system file checker to fix errors in system files.
To do so, follow the steps below:
1. Open elevated Command Prompt (Admin).
2. Here, type the following commands one by one:
- sfc /scannow
- exe/Online /Cleanup-image /Checkhealth
- exe/Online /Cleanup-image /Restorehealth
3. Wait for the process to finish.
4. Once that is done, run the following commands:
- net stop wuauserv
- net stop bits
- rename C:\Windows\SoftwareDistribution\ to SoftwareDistribution.bak
- net start wuauserv
- net start bits
You can now try reconnecting the system and installing the problematic updates again.
Once that is done, we suggest optimizing the system as doing so will help avoid facing such problems.
Best Way to Optimize System
We suggest Advanced System Optimizer – the best PC Optimization tool to clean the system and fix PC errors.
This advanced PC cleaner assists in fixing common PC issues responsible for “Undoing changes made to your computer.”
Additionally, you can use it to fix invalid registry entries, wipe out junk files, optimize the hard disk, update outdated drivers, clean malware, and more. The PC optimizer also helps automate the optimization process.
Fix Undoing Changes Made to Your Computer
Alongside restarting the system and Wi-Fi connection, there are other solutions to fix the undoing changes problem. Try them one by one and see which one works for you.
1. Boot Windows into Safe Mode
- Press and hold the Shift + F8 or F8 key when the system restarts.
- You will now see the advanced startup screen with different options
- Click Options > Troubleshoot > Advanced options > Startup Settings > Enable Safe Mode.
Read Here- Advanced System Optimizer | Best PC Optimizer – A Summary
2. Delete Latest Updates
Once you are in Windows into Safe Mode, delete recently installed updates.
1. Type Control Panel in Windows search > Enter key.
2. Click Programs/ Programs & Features > View installed updates.
3. You will now get a new window with the list of all Windows updates. Select the recent one and hit the Uninstall button.
4. Reboot Windows 10 in normal mode.
Read Also: How to Free Up Space in Windows 11,10
3. Use Windows Update Troubleshooter
To troubleshoot common Windows issues, there’s a built-in troubleshooter in Windows 10. Follow the steps below to use it:
1. Press Windows + I > Update & Security > Troubleshoot > Windows Update > Run the troubleshooter.
2. Go with the screen prompts and let the process finish.
3. Restart the PC to check whether the undoing error is fixed.
4. Block Windows Automatic Updates
To do so, follow the steps below:
1. Press Windows + I
2. Look for Network & Internet.
3. Click Status in the right pane > Change connection properties in the left.
4. Metered connection option > enable a Metered connection.
This will temporarily block updates from being downloaded.
Read Here- Glossary – Advanced System Optimizer – PC Optimizer
4. Rename the SoftwareDistribution folder
To store Windows installation files temporarily, the SoftwareDistribution folder is used. When these files corrupt during installation, you encounter Windows 10 undoing changes error messages.
To fix it, let’s try renaming the folder in question.
1. Run elevated Command Prompt.
2. Type the following command. Make sure you press enter after every command.
net stop wuauserv
net stop bits
rename C:\Windows\SoftwareDistribution\ to SoftwareDistribution.bak
net start wuauserv
net start bits
3. Now update Windows, and you should not face any problems.
5. Run SFC Scan
After renaming the SoftwareDistribution folder, run the system file checker, the built-in tool to fix corrupt Windows files if you still face the problem. To run it, follow these steps:
1. In the Windows search bar, type Command Prompt select the best result, and click Run as administrator.
2. Type sfc/scannow > and press the Enter key.
3. Wait for the system file checker to scan the files and fix corrupt files.
4. Restart PC to apply changes.
6. Run DISM
After running the system file checker, we suggest you run the Windows Deployment Image Servicing and Management service. This, along with the system file checker, will help fix undoing changes made to your computer. To run it, follow these steps:
1. Run Command Prompt as administrator.
2. Type the following command:
DISM.exe/Online /Cleanup-image /Restorehealth
3. If you face any problem, connect the installation USB or DVD. and run the following command in Command Prompt as administrator mode.
DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:RepairSourceWindows /LimitAccess
Note: If you are using DVD or USB, replace C:RepairSourceWindows /LimitAccess with the drive letter of the removable drive.
4. Let the command run > close CMD and restart PC.
This will help fix Windows 10 updates undoing changes made to your computer error.
Read This- How to Install your Personal PC Cleaner – Advanced System Optimizer
FAQ-About Fix Undoing Changes Made To Your Computer
Also Read: How to Install your Personal PC Cleaner