How to Fix Undoing Changes Made To Your Computer In Windows 11,10
Systweak Support
November 2nd, 2021
,
After installing the latest updates some users are complaining about encountering an Undoing changes boot loop. The error indicates that the machine failed to install the updates and is trying to revert the changes.
If you are stuck in a similar situation, you are at the right place. In this post, we will discuss how to fix we couldn’t complete the updates/undoing changes made to your computer.
Reasons for Windows 10 Undoing Changes, Error?
There can be multiple reasons for Undoing changes error messages. However, the most common of all is because of an update issue.
Reasons for Undoing Changes Error Message
- Update service stopped working while updates were downloading.
- Corrupted system files
- Unexpected shut down during the update process.
Ways to Fix the “Undoing Changes” Error in Windows 10?
1. Shut Down Your PC and Turn Off Wi-Fi
Shut down the system and turn off the Wi-Fi connection. Alternatively, you can unplug the router > wait for a minute or so and then turn back the system to check if “undoing changes” is solved or not.
If you managed to boot your computer normally, run the system file checker to fix errors in system files.
To do so, follow the steps below:
1. Open elevated Command Prompt (Admin).
2. Here, type the following commands one by one:
-
- sfc /scannow
- exe/Online /Cleanup-image /Checkhealth
- exe/Online /Cleanup-image /Restorehealth
3. Wait for the process to finish.
4. Once that is done, run the following commands:
-
- net stop wuauserv
- net stop bits
- rename C:\Windows\SoftwareDistribution\ to SoftwareDistribution.bak
- net start wuauserv
- net start bits
You can now try reconnecting the system and installing the problematic updates again.
Once that is done, we suggest optimizing the system as doing so will help avoid facing any such problems.
Best Way to Optimize System
Well, to clean the system and fix PC errors, we suggest using Advanced System Optimizer – the best Free PC Optimizer.
Download From Here
This advanced PC cleaner helps fix the common issues responsible for, “Undoing changes made to your computer”.
Additionally, you can use it to fix invalid registry entries, clean junk files, optimize the hard disk, update outdated drivers, clean malware, and more. This top PC optimizer also helps automate the optimization process.
Visit Here
Fix Undoing Changes Made to Your Computer
Alongside, restarting the system and Wi-Fi connection, there are other solutions to fix the undoing changes problem. Try them one by one and see which one works for you.
1. Booting Windows into Safe Mode
- Press and hold the Shift + F8 altogether or F8 key when the system restarts.
- You will now see the advanced startup screen with different options
- Click Options > Troubleshoot > Advanced options > Startup Settings > Enable Safe Mode.
To learn in detail about Safe Mode, read our article on How to boot in Safe Mode.
Read Here- Advanced System Optimizer | Best PC Optimizer – A Summary
2. Delete Latest Updates
Once you are in Windows into Safe Mode, delete recently installed updates. To do so, follow the steps below:
1. Type Control Panel in Windows search > Enter key.
2. Click Programs/ Programs & Features > View installed updates.
3. You will now get a new window with the list of all Windows updates. Select the recent one and hit the Uninstall button.
4. Reboot Windows 10 in normal mode.
You should no longer face problems if we couldn’t complete the update’s error message.
3. Use Windows Update Troubleshooter
Windows 10 offers a troubleshooter to use it follow the steps below:
1. Press Windows + I > Update & Security > Troubleshoot > Windows Update > Run the troubleshooter.
2. Follow on-screen instructions and wait for the process to finish.
3. Restart the computer. This will fix undoing changes made to your computer on Windows 10
3. Block Windows Automatic Updates
You cannot block Windows updates but can block updates temporarily.
To do so, follow the steps below:
1. Press Windows + I
2. Look for Network & Internet.
3. Click Status in the right pane > Change connection properties in the left.
4. Metered connection option > enable a Metered connection.
This will temporarily block updates from being downloaded.
Read Here- Glossary – Advanced System Optimizer – PC Optimizer
4. Rename the SoftwareDistribution folder
To store temporary Windows installation files, the SoftwareDistribution folder is used. If any file gets corrupt during installation, you might end up facing Windows 10 undoing changes error messages. Therefore, to fix it, let’s try renaming the folder in question. To do so, follow the steps below:
1. Run elevated Command Prompt.
2. Here, type the following command. Make sure you press enter after every command.
net stop wuauserv
net stop bits
rename C:\Windows\SoftwareDistribution\ to SoftwareDistribution.bak
net start wuauserv
net start bits
3. Now try updating Windows and you should not face any problem.
Read This- How to Install your Personal PC Cleaner – Advanced System Optimizer
That’s all, using any of the fixes above you can get rid of the dreaded Windows 10 undoing changes made to your computer error message. In addition to this, we suggest using Advanced System Optimizer. Click the Download button to get this amazing tool.
